ترمودینامیک

Charpy impact

Description:

In the field of industrial quality control, the impact test is a widely used test method with which to quickly and easily determine characteristics for a material or component analysis. This  experimental unit is a solid-pendulum impact tester that designed for the Charpy notched-bar impact test. The clean layout and simple operation mean the experimental sequence can be observed in all details and phases. In the experiment, the hammer attached to a pendulum arm describes an arc. At the lowest point of the hammer path, the hammer transfers part of its kinetic energy to the notched specimen. The specimen is either destroyed or bent by the impact and pushed between the supports. The notched-bar impact work required to deform the specimen is read directly off a large scale. In order to vary the output energy, the mass of the hammer can be changed by adding or removing weights. A brake reduces the residual energy of the hammer on each swing until it reaches zero. A protective ring ensures the experiments can be conducted safely while also fixing the hammer in place. The hammer is triggered with two hands for safer operation. A protective cover the operating area is available as an accessory. The experimental results allow quality control and an analysis of the fracture behaviour of different metallic materials. Non-metallic specimens can also be used. Specimens with different notch geometries, in different materials and specimen dimensions are included in the scope of delivery.

Learning Objective:

Determine the notched-bar impact work

Determine the notched-bar impact strength

Analyse the fracture surface characteristics

Plot a notched-bar impact work–temperature diagram

Influence of notch shape, material and specimen temperature on the notchedbar impact work

Device component:

Hammer with removable additional weights

Notched bar impact specimens

Hammer fixing

Weights

• قبلی
• بعدی