سایت شما برای نمایش بهتر نیاز به استفاده از کوکی دارد Cookie policy. I accept cookies from this site.Agree

Simple Gear

Description:

Gears are employed as a link between drive machine and work machine. They are used to vary torque and speed and to change direction. The aim of dynamic gear analysis is an understanding of the motion sequences and the influence of inertia. This experimental unit is used to study the dynamic behaviour in single-stage, two-stage and three-stage spur gears during transient operation. The trainer includes four parallel shafts, three drive wheels and three drive gears. Coupling pins can be used to couple the shafts such that different gear stages can be realised. A flywheel may be attached to each shaft in order to increase the rotational inertia. The gear is accelerated via a cable drum and a variable set of weights. The set of weights is raised via a crank. A ratchet prevents the weight from accidentally escaping. A clamping roller freewheel enables free further rotation after the weight has been released. A hand brake allows smooth deceleration. The transparent protective cover with safety lock prevents accidental contact with the rotating parts. Inductive speed sensors on all drive gears allow the rotational speeds to be measured. The measured values are transmitted directly to a PC via USB. The data acquisition software is included. The angular acceleration can be read from the diagrams. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Learning Objective:

determining the

-angular acceleration on gears

- Mass moment of inertia of the gear

- Friction

- Gear efficiency

Device component :

Flywheels

Drive gear

Weights

دستگاه‌های کنترل فرآیند

pH Control Unit

pH Control Unit

Process Control Laboratory

دستگاه کنترل pH - آزمایشگاه کنترل فرآیند
 Temperature Control Unit

Temperature Control Unit

Process Control Laboratory

دستگاه کنترل دما - آزمایشگاه کنترل فرآیند
Flow Control Unit

Flow Control Unit

Process Control Laboratory

دستگاه کنترل جریان - آزمایشگاه کنترل فرآیند
 Level Control Unit

Level Control Unit

Process Control Laboratory

دستگاه کنترل سطح - آزمایشگاه کنترل فرآیند
Stirred tanks unit

Stirred tanks unit

Process Control Laboratory

دستگاه تانک‌های تداخلی - آزمایشگاه کنترل فرآیند
 Pressure Control Unit

Pressure Control Unit

Process Control Laboratory

دستگاه کنترل فشار - آزمایشگاه کنترل فرآیند
 Universal Control Unit

Universal Control Unit

Process Control Laboratory

دستگاه کنترل یونیورسال - آزمایشگاه کنترل فرآیند
Air Temperature Control Unit

Air Temperature Control Unit

Process Control Laboratory

دستگاه کنترل دمای هوا- آزمایشگاه کنترل فرآیند

کلیه ی مطالب برای شرکت پژواک پژوه صنعت محفوظ می باشد.

تماس و پشتیبانی

  • آدرس : شهرک صنعتی شمس آباد | بلوار دشتستان | گل افشان ۴  | پلاک ۱۳
  • ایمیل : pps_eng@yahoo.com
  • تلفن : 56236055-021
  • همراه: 09126218213

 

 

سایت شما برای نمایش بهتر نیاز به استفاده از کوکی دارد Cookie policy. I accept cookies from this site.Agree